Leather factory for sale 3 connected production halls - New Salhia City Sharqia
El Salheya Leather Factory
Location: El Salheya New City – Sharqia Governorate – First Industrial Zone (Sector H, Plot Nos. 20, 21…)
Strategically located within a fully integrated industrial zone
Overview
Total Area: 44023 sqm
The factory consists of:
3 connected production halls
Service building
Laboratory building
Industrial wastewater treatment plant
Production Process (Halls)
Hall 1: Leather Preparation & Pre-Tanning
Raw material storage (buffalo, cow, calf, sheep, goat leather)
Equipped with:
2 central cooling chillers
2 cold rooms (8–22°C)
Process Flow:
Conveyor transport → Lime drums (6 Spanish drums, 1×1 m, 22 HP, dual speed)
Fleshing machine (4 m height) for fat removal
Lime splitting machine (3 m)
Chrome tanning:
6 chrome drums (3×3 m, 54 HP, dual speed)
Splitting into:
Outer leather layer
Inner split layer
Finishing Steps:
Water pressing machine
Shaving machines:
Italian (3 m) for large hides
French (1.86 m) for smaller/split hides
Transfer to dyeing drums
Hall 2: Dyeing & Drying
Dyeing:
3 drums (3×2.64 m – 54 HP)
4 drums (2×2.64 m – 22 HP)
Post-Dyeing:
Setting-out machines (small & large)
Vacuum drying machine:
Steam heating up to 82°C
High moisture extraction
Overhead conveyor drying system
Hall 3: Final Finishing
Conveyor drying system
Opening machines:
Large (Czech 2.68 m)
Small (French 1.64 m)
Stretching Machine:
Heat up to 82°C to maximize leather surface
Surface Finishing:
Spray coating machine (spray gun + drying cabin + cooling)
Embossing press (Czech) for patterns like:
Fish, ostrich, peacock feather, snake, crocodile
OR
Ironing machines (2.63 m / 1.86 m) for gloss finish
Final Stage:
Area measurement
Sorting & grading
Baling & export preparation
Suede Section (within Hall 3)
Fine sanding for suede production
Dust extraction system (5 large bags)
Dry shaving machine (1.63 m)
Waste compression into blocks (22 cm²)
Softening drum (1×1 m)
Supporting Systems
2 air compressors (alternating operation)
Pneumatic operation for drums, valves, and brakes
Equipment Origin:
Drums: Spanish
Machines: French, Italian, Czech
Additional Equipment (not installed):
Italian machines for sole leather production
6 unused Spanish drums for sole leather
Service Building
Main electrical room:
2 transformers (125 KVA each)
Power distribution room (2 panels)
Boiler room:
Capacity: 2.6 tons
Functions:
Hot water supply for drums
Steam supply for vacuum, stretching, and spraying
Laboratory Building
Purpose:
Sample preparation before production
Quality control at every stage
Components:
Test drums:
One for liming stage
One for chrome stage
Results sent to production manager
Quality Tests (First Floor):
Tensile strength
Water permeability
Flexibility & bending
Coating adhesion
Heat resistance
Safety Systems
Fully integrated fire-fighting network covering:
Production halls
Administration building
Laboratory building
Industrial Wastewater Treatment Plant
Multi-stage treatment:
Chemical
Physical
Biological
Price
$20,000,000
For immediate viewing and more details, please contact:
O04
Location: El Salheya New City – Sharqia Governorate – First Industrial Zone (Sector H, Plot Nos. 20, 21…)
Strategically located within a fully integrated industrial zone
Overview
Total Area: 44023 sqm
The factory consists of:
3 connected production halls
Service building
Laboratory building
Industrial wastewater treatment plant
Production Process (Halls)
Hall 1: Leather Preparation & Pre-Tanning
Raw material storage (buffalo, cow, calf, sheep, goat leather)
Equipped with:
2 central cooling chillers
2 cold rooms (8–22°C)
Process Flow:
Conveyor transport → Lime drums (6 Spanish drums, 1×1 m, 22 HP, dual speed)
Fleshing machine (4 m height) for fat removal
Lime splitting machine (3 m)
Chrome tanning:
6 chrome drums (3×3 m, 54 HP, dual speed)
Splitting into:
Outer leather layer
Inner split layer
Finishing Steps:
Water pressing machine
Shaving machines:
Italian (3 m) for large hides
French (1.86 m) for smaller/split hides
Transfer to dyeing drums
Hall 2: Dyeing & Drying
Dyeing:
3 drums (3×2.64 m – 54 HP)
4 drums (2×2.64 m – 22 HP)
Post-Dyeing:
Setting-out machines (small & large)
Vacuum drying machine:
Steam heating up to 82°C
High moisture extraction
Overhead conveyor drying system
Hall 3: Final Finishing
Conveyor drying system
Opening machines:
Large (Czech 2.68 m)
Small (French 1.64 m)
Stretching Machine:
Heat up to 82°C to maximize leather surface
Surface Finishing:
Spray coating machine (spray gun + drying cabin + cooling)
Embossing press (Czech) for patterns like:
Fish, ostrich, peacock feather, snake, crocodile
OR
Ironing machines (2.63 m / 1.86 m) for gloss finish
Final Stage:
Area measurement
Sorting & grading
Baling & export preparation
Suede Section (within Hall 3)
Fine sanding for suede production
Dust extraction system (5 large bags)
Dry shaving machine (1.63 m)
Waste compression into blocks (22 cm²)
Softening drum (1×1 m)
Supporting Systems
2 air compressors (alternating operation)
Pneumatic operation for drums, valves, and brakes
Equipment Origin:
Drums: Spanish
Machines: French, Italian, Czech
Additional Equipment (not installed):
Italian machines for sole leather production
6 unused Spanish drums for sole leather
Service Building
Main electrical room:
2 transformers (125 KVA each)
Power distribution room (2 panels)
Boiler room:
Capacity: 2.6 tons
Functions:
Hot water supply for drums
Steam supply for vacuum, stretching, and spraying
Laboratory Building
Purpose:
Sample preparation before production
Quality control at every stage
Components:
Test drums:
One for liming stage
One for chrome stage
Results sent to production manager
Quality Tests (First Floor):
Tensile strength
Water permeability
Flexibility & bending
Coating adhesion
Heat resistance
Safety Systems
Fully integrated fire-fighting network covering:
Production halls
Administration building
Laboratory building
Industrial Wastewater Treatment Plant
Multi-stage treatment:
Chemical
Physical
Biological
Price
$20,000,000
For immediate viewing and more details, please contact:
O04
Property Information
- TypeFactory
- PurposeFor Sale
- Reference no.Bayut - O04-4-30
- CompletionReady
- Published at17 July 2026
Features / Amenities
Security Staff
Trends & Indices
Mortgage
Location & Nearby
Location
Schools
Restaurants
Hospitals
Parks
